If you are using a Dell computer, you may come across the error code 2000-0151 when booting the computer. This issue may be caused by the misconfigured system files or an outdated hard drive. The Dell error code 2000-0151 indicates your hard drive has failed or your hard drive is near the end of its life.
So, when encountering this error code, the important things are to recover the data from your Dell computer and fix the error. Here, we will show you how to recover your files first.
First, when encountering the code 2000-0151, your computer may be still bootable. In this situation, you can choose to back up your important files to another location and keep them safe. To back up files, you can use the professional backup software – MiniTool ShadowMaker.
Second, if your Dell computer fails to boot when encountering the error code 2000-0151, you can also recover data. You can use a piece of professional power data recovery software such as MiniTool Power Data Recovery. It is able to recover data from the unbootable computer.
After recovery the data from the computer with the error code 2000-0151, you can begin to solve the problem Dell error code 2000-0151.
Way 1. Check BIOS Settings
The Dell error code 2000-0151 may be caused by the incorrect BIOS settings. So, in order to fix this issue, you can check the BIOS settings first.
Restart your computer and enter BIOS. Then select Load Default, Load Setup Defaults, Load Default Settings, and Load Optimal Defaults and hit Enter to reset BIOS settings.
Way 2. Run Surface Test
The Dell error code 2000-0151 may occur when there are bad sectors on your hard drive. So, it is necessary for you to check how many bad sectors on the hard drive. If there are too many, it means that your hard drive is imminent to fail. So, you can use a tool to check the bad sectors on the hard drive. If there are few bad sectors on the hard drive, you can choose to shield them. If there are too many bad sectors on the hard drive, you need to back up your files and replace the hard drive.
Way 3. Run Chkdsk
In order to fix the Dell error code 2000-0151, you can also run chkdsk tool. If your computer is unbootable, boot your computer from the Windows bootable drive. Then select language, keyboard input and time. Click Repair your computer > Troubleshoot > Advanced Options > Command Prompt.
Next, type chkdsk c: /f /r command in the command line window and hit Enter to continue. This tool will help to fix some issues such as bad sectors, improper shutdown or corrupted software, etc. Once all steps are finished, reboot your computer and check whether the Dell error code 2000-0151 is fixed.
Way 4. Replace Hard Drive
If the above solutions cannot fix Dell error code 2000-0151, your hard drive may have failed. In this situation, you can choose to replace a hard drive. If you have recovered your files before, you can replace the hard drive directly. If you do not recover the files, please recover them first. After that, check whether the Dell error code 2000-0151 is fixed.
To sum up, this post shows 4 ways for you to fix the Dell error code 2000-0151. If you come across the same error, try these solutions.